SPEC CLUTCHES SF874 STAGE 4 CLUTCH KIT FORD SVT 1999-2004 MUSTANG COBRA MACH 1

Spec Stage 4 Clutch Kit - 1999-2004 Ford Mustang Cobra / MACH 1Types of Driving:Street, Drag, Pulling, AutocrossThis unit is a solid hub version of the stage 3. The hub is solid 8-rivet and the assembly is heat treated for strength and durability. It is available in a 3, 4 or 6 puck configuration. Use the 3 puck for the lightest option or the 6 puck for the smoothest engagement. The 4 puck is a good compromise for both. Street drivable in 6 puck configuration, but not street friendly due to the rigid hub. Best for drag racing, road racing, pulling, rallye and drift.

• High clamp pressure plate
• Carbon-Graphite Friction Material
• High torque solid hub and disc assembly
• Bearing and tool kit
• Torque Capacity - 760ft lbs.

Additional Options

• Liberty Gear 26 Spline Input Shaft - Upgrade your weak stock 10 Spline shaft to a Liberty Gear 26 Spline Shaft to give your clutch more holding power.
• Aluminum Flywheel - Your choice of a Fidanza or SPEC Lightweight Aluminum Flywheel with replaceable steel insert.
• Low Pedal Requirement Option - Substantially reduces pedal requirement to near stock or lower levels, while providing the same high clamp load as our standard high clamp units
• TOB Sleeve - A High Quality 4340 Forged Steel TOB Retainer Sleeve. The Sleeve comes with a genuine Tremec transmission seal and O-Ring for a perfect fit. By installiing this piece you will boost the sturdiness and life of your transmission
• Pilot Bearing - The pilot bearing should be changed when you rebuild your engine ideally. It is a fairly expensive part but is extremely important in supporting the transmission.